Our Berau Coal Mine Executive Summary

Location : Berau, Kalimantan Timur Area

Accessbility : 1 hour from Balikpapan, then about 3 hours by cars/2 hours by boat

Port Loading : Pantai Tanjung Berau

Coal Quality :

Total Moisture : 14.91 %
Inherent Moisture : 10,14 %
Kandungan Abu : 1,36 %
Fixed Carbon : 43,92 %
Total Sulfur : 0,14 %
Calori : 4.800 – 5.200

Koordinat :

KP1 Garis Bujur (BT) 117° 56` 13” Garis Lintang (LU) 2° 17’ 02”

KP2 Garis Bujur (BT) 118° 01’ 26” Garis Lintang (LU) 2° 17’ 03”

KP3 Garis Bujur (BT) 118° 01’ 26” Garis Lintang (LU) 2° 13’ 35”

KP4 Garis Bujur (BT) 117° 52’ 03” Garis Lintang (LU) 2° 13’ 35”

KP5 Garis Bujur (BT) 117° 52’ 03” Garis Lintang (LU) 2° 15’ 46”

KP6 Garis Bujur (BT) 117° 56’ 13” Garis Lintang (LU) 2° 15’ 46”

Perijinan :

KP Eksplorasi : No. 540/331/PTB.II/2003 tgl 01 Agustus 2003

KP Ekploitasi : No. 540/77/PTB.II/III/2003

KP Pengangkutan dan Penjualan : No. 540/78/PTB.II/III

AMDAL : SK Bupati Berau No. 42 tahun 2004

e - mail: intitehnikutama@yahoo.com

New Location and New Specification

Our New Location Specification:

TM 7% ~ IM 3% ~ Ash 16% ~ Sulfur 0,5% ~ VM 39% ~ CV 63 - 61

Call Mr Chin Han / Mr Kastiawan

0542.7022229 / 0542.7023238 / 081357111000

email: intitehnikutama@yahoo.com

The Best Coal Producer in Indonesia

International Standar Quality and Specification

For the excellence of the coal quality, we implementing a quality control system, wich is based on a systematical sampling procedure, comply with the latest international standard.

For the global market requirement, we has the coal specification to offer that low on ash and also low on sulfur content.


Our Exploration Mining method and processing:

1. Site Survey

2. Drilling

3. Lab Test and Examination

4. Mapping

5. Data input and Modelling


Our Exploitation Mining method and processing:

1. Land Clearing

2. Ripping and Digging

3. Overburden Removal

4. Coal Getting

5. Coal Transporting

6. Weighing Bridge


Our Preparation and Shipment:

1. Crushing

2. Stockpile

3. Sampling

4. Ponton Loading

5. Offshore Transhipment

Our mining operation applies an open cut mining using truck and shovel method. This method is divided into two activities: the overburden removal and the coalmining.

The overburden removal activities began with excavation of topsoil followed by digging of hard material in the mining area.

Once the topsoil is removed and carefully stored in a designated area for future restoration purpose, the hard material of overburden at lower layer is drilled.

The process continued as it is being excavated and hauled by special designed overburden truck to the backfill or disposal area.

After the overburden is totally removed and the exposed coal surface has been cleaned up, the coal mining process take place.

The mined coal is then transported to the crushing plant through 2-14 km long coal hauling road

Our Property Quality and Specification

Location I

Proximate Analysis (adb) :
- Total Moisture (ar)% = 24 - 28
- Inherent Moisture % = 15 - 17
- Ash Content % = 4 - 8
- Fixed Carbon % = 40 - 45
- Volatile Matter % = 38 - 42
- Total Sulfur % = 0,25 - 0,8
- Gross Calorific Value Kcal / kg = 5600 - 5800

Physical Property :
- Hardgrove Grindability = 40 - 48

Ultimate Analysis (daf):
- Carbon % = 74 - 77
- Hydrogen % = 4.00 - 6.00
- Nitrogen % = 1.50 - 1.80
- Sulfur % = 0.25 - 0.80
- Oxygen % = 16 - 19

Ash fusion Temperature ( reducing atmosphere ):
- Initial *C = > 1150
- Softening *C = > 1180
- Hemispehere = > 1290
- Flow *C = > 1330

Ash Composition ( reducing atmosphere ) :
- Silica % = 43 - 54
- Alumnina % = 15 - 20
- Iron % = 8 - 13
- Calcium % = 7 - 12
- Magnesium % = 3 - 6
- Titanium % = 0.50 - 1.40
- Pottasium % = 0.80 - 1.30
- Sodium % = 0.20 - 0.50
- Phosporus = 0.10 - 0.40
- Sulfur % = 5.00 - 9.00
- Manganese % = 0.10 - 0.20


Location II

Proximate Analysis (adb) :
- Total Moisture (ar)% = 20 -25
- Inherent Moisture % = 13 - 15
- Ash Content % = 4 - 8
- Fixed Carbon % = 40 - 45
- Volatile Matter % = 38 - 42
- Total Sulfur % = 0,5 - 1.00
- Gross Calorific Value Kcal / kg = 5800 - 6000

Physical Property :
- Hardgrove Grindability = 40 - 48

Ultimate Analysis (daf):
- Carbon % = 74 - 77
- Hydrogen % = 4.00 - 6.00
- Nitrogen % = 1.50 - 1.80
- Sulfur % = 0.25 - 0.80
- Oxygen % = 16 - 19

Ash fusion Temperature ( reducing atmosphere ):
- Initial *C = > 1150
- Softening *C = > 1180
- Hemispehere = > 1290
- Flow *C = > 1330

Ash Composition ( reducing atmosphere ) :
- Silica % = 43 - 54
- Alumnina % = 15 - 20
- Iron % = 8 - 13
- Calcium % = 7 - 12
- Magnesium % = 3 - 6
- Titanium % = 0.50 - 1.40
- Pottasium % = 0.80 - 1.30
- Sodium % = 0.20 - 0.50
- Phosporus = 0.10 - 0.40
- Sulfur % = 5.00 - 9.00
- Manganese % = 0.10 - 0.20

e-mail: intitehnikutama@yahoo.com

phone: +62. 542. 7022229